ABS Enclosure 121x56x31 Black
Varenummer:
86-640
Varekode: PP4SW
Vægt: 48 g
8 stk.
på lager
Specifikationer
| Farve | sort |
|---|---|
| Materiale | plastik |
| Produkt | boks |
| Længde | 12.1 cm |
| Bredde | 5.6 cm |
| Højde | 3.1 cm |
Gruppe:
G4312
SUPERTRONIC ABS Universal Enclosures
Series: PP
Colour: Black
SUPERTRONIC ABS Universal Enclosures
Series: PP
Colour: Black
| PP2SW |
 |
| Features |
| • Black, easy to hold enclosure • Guiding studs at the four enclosure corners provide a secure fit of lower base and lid. • Lap joint construction • Plate with tapping screw attached to molded cam (129x59mm) |
|
| Dimensions |
| |
| Outer: | 153x73x43mm |
| Inner: | 149x69x39mm |
| |
| PP4SW |
|
| Features |
| • Enclosure made of ABS, black glossy finish • Rounded corners, offset, rim line all around • Guiding studs for a printed circuit using tapping screws |
|
| Dimensions |
| |
| Outer: | 121x56x31mm |
| Inner: | 116x51x27mm |
| |
| PP6SW |
|
| Features |
| • Black enclosure consisting of base and cover with rounded gloss finish surface as well as offset edge • Lap joint construction • Upper and lower part are attached by a cross-recessed screw. • On the inside, place for mounting a printed circuit on two moulded cams using tapping screws (enclosed) |
|
| Dimensions |
| |
| Outer: | 90x56x23mm |
| Inner: | 86x52x19mm |
| |
| PP9SW |
|
| Features |
| • Similar to PP6 but in larger dimensions |
|
| Dimensions |
| |
| Outer: | 121x56x42mm |
| Inner: | 116x52x38mm |
| |
| PP19SW |
|
| Features |
| • Black enclosure, consisting of enclosure base and 15mm high flat lid • Lid and base are connected by four guiding studs. • Lap joint construction • There are four moulded supporting cams in lid and base to mount a printed circuit. |
|
| Dimensions |
| |
| Outer: | 125x70x45mm |
| Inner: | 119x64x40mm |
| |
| PP25SW |
|
| Features |
| • Enclosure consisting of base and lid • Two piece lap joint construction with locking on one side and and self-tapping screws • Additional supporting cams in the base to mount printed circuits • There is an opening in the cover for a loudspeaker or transducer. |
|
| Dimensions |
| |
| Outer: | 90x56x23mm |
| Inner: | 86x52x19mm |
| |
| Terms of Delivery |
| Minimum order quantity: 1 PKU = 5 pieces |
|
| Manufacturer |
| SUPERTRONIC http://www.supertronic.com |
|
Inkl. moms
Kr. 40,00
- v/10 – Kr. 31,64
- v/25 – Kr. 27,81
- v/100 – Kr. 24,02
ABS Enclosure 121x56x31 Black
86-640
/ PP4SW
8 stk.
på lager
Specifikationer
- Farve sort
- Materiale plastik
- Produkt boks
- Længde 12.1 cm
- Bredde 5.6 cm
- Højde 3.1 cm
Gruppe:
G4312
SUPERTRONIC ABS Universal Enclosures
Series: PP
Colour: Black
SUPERTRONIC ABS Universal Enclosures
Series: PP
Colour: Black
| PP2SW |
|
| Features |
| • Black, easy to hold enclosure • Guiding studs at the four enclosure corners provide a secure fit of lower base and lid. • Lap joint construction • Plate with tapping screw attached to molded cam (129x59mm) |
|
| Dimensions |
| |
| Outer: | 153x73x43mm |
| Inner: | 149x69x39mm |
| |
| PP4SW |
|
| Features |
| • Enclosure made of ABS, black glossy finish • Rounded corners, offset, rim line all around • Guiding studs for a printed circuit using tapping screws |
|
| Dimensions |
| |
| Outer: | 121x56x31mm |
| Inner: | 116x51x27mm |
| |
| PP6SW |
|
| Features |
| • Black enclosure consisting of base and cover with rounded gloss finish surface as well as offset edge • Lap joint construction • Upper and lower part are attached by a cross-recessed screw. • On the inside, place for mounting a printed circuit on two moulded cams using tapping screws (enclosed) |
|
| Dimensions |
| |
| Outer: | 90x56x23mm |
| Inner: | 86x52x19mm |
| |
| PP9SW |
|
| Features |
| • Similar to PP6 but in larger dimensions |
|
| Dimensions |
| |
| Outer: | 121x56x42mm |
| Inner: | 116x52x38mm |
| |
| PP19SW |
|
| Features |
| • Black enclosure, consisting of enclosure base and 15mm high flat lid • Lid and base are connected by four guiding studs. • Lap joint construction • There are four moulded supporting cams in lid and base to mount a printed circuit. |
|
| Dimensions |
| |
| Outer: | 125x70x45mm |
| Inner: | 119x64x40mm |
| |
| PP25SW |
|
| Features |
| • Enclosure consisting of base and lid • Two piece lap joint construction with locking on one side and and self-tapping screws • Additional supporting cams in the base to mount printed circuits • There is an opening in the cover for a loudspeaker or transducer. |
|
| Dimensions |
| |
| Outer: | 90x56x23mm |
| Inner: | 86x52x19mm |
| |
| Terms of Delivery |
| Minimum order quantity: 1 PKU = 5 pieces |
|
| Manufacturer |
| SUPERTRONIC http://www.supertronic.com |
|