ABS Enclosure 100x50x25 Black
Varenummer:
86-634
Varekode: PP41SW
Vægt: 40 g
40 stk.
på lager
Specifikationer
| Farve | sort |
|---|---|
| Materiale | plastik |
| Produkt | boks |
| Længde | 10 cm |
| Bredde | 5 cm |
| Højde | 2.5 cm |
Gruppe:
G4117
SUPERTRONIC ABS Miniature Enclosures
Series: PP
Colours: Black, White
SUPERTRONIC ABS Miniature Enclosures
Series: PP
Colours: Black, White
| PP12SW |
 |
| Features |
| • Hand-held enclosure consisting of two shell halves • Lap joint construction • Two lateral guides (stud and bushing) are used to connect both shell halves. • Two cams for self-tapping screws where a printed circuit can be mounted. |
|
| PP22SW |
| Transmission Receipt Enclosure for a Remote Control |
|
| Features |
| • Consisting of two shell halves which snap together to connect. • Lap joint construction. • 12V-Battery is required. (GP-23A is suitable and available in our "Components & Devices" catalogue at product group S1138) • The printed circuit is fastened without screws onto a molded stud. • In the upper section, there is a countersunk keypad. • A button actuator is included which lies adjacent to an opening for a LED (You will find suitable LEDs in our Semiconductors catalogue at product group W1222). • The firmly attached plastic button has a stroke of approx. 2mm, e.g. for operating a microswitch which is beneath (not supplied in the delivery). |
|
| Dimensions |
| |
| Outer: | 57x36x16mm |
| Inner, (Usable)1): | 42x32x9mm |
| 1) Including Battery Compartment for Round Cells, Contacts are Attached Loosely | |
| |
| PP23SW |
|
| Features |
| • Similar to PP12SW, but with 4 screws composed of stud and bushing placed in the corner to connect both shell halves |
|
| PP24SW |
| Transmission Receipt Enclosure for a Remote Control |
|
| Features |
| • Similar to PP22SW but with two button actuators lying adjacent to each other (black/red) and an opening above for a LED |
|
| Dimensions |
| |
| Outer: | 57x36x16mm |
| Inner (Usable)1): | 42x32x9mm |
| 1) Including Battery Compartment for Round Cells, Contacts are Attached Loosely | |
| |
| PP40SW |
|
| Features |
| • Black enclosure made of ABS • Lid and base are attached using two studs. • Fastening point for printed circuit |
|
| Dimensions |
| |
| Outer: | 50x36x20mm |
| Inner: | 46x33x16mm |
| |
| PP41SW |
|
| Features |
| • Black enclosure made of ABS consisting of base and lid • Four countersunk screws seal the housing all around. • Four mounting studs for a printed circuit 82x46mm |
|
| Dimensions |
| |
| Outer: | 100x50x25mm |
| Inner: | 96x46x21mm |
| |
| PP42WS |
|
| Features |
| • White sensor enclosure made of ABS • Large louvered plates on either side • Fastening points for printed circuit |
|
| Dimensions |
| |
| Outer: | 71x71x27mm |
| Inner: | 67x67x23mm |
| |
| PP100NBN |
|
| Features |
| • Case for a remote-control transmitter • Comprising three case sections (upper, middle and lower) joined with a screw. • Upper and lower case sections in black, middle case section in blue • Middle case section comes with one pressbutton with approx. 2mm travel, e.g. for actuation of a microswitch underneath (not included in delivery). • For 12V battery • LED aperture |
|
| Note |
| You will find suitable tact switches in this catalogue from product group E3331 on. You will find suitable battery GP-23A in our red "Components & Devices" catalogue in product group S1138. You will find suitable LEDs in our green "Semiconductors" catalogue fron product group W1222. |
|
| Terms of Delivery |
| Minimum order quantity: 1 PKU = 1 piece |
|
| Manufacturer |
| SUPERTRONIC http://www.supertronic.com |
|
ABS Enclosure 100x50x25 Black
86-634
/ PP41SW
40 stk.
på lager
Specifikationer
- Farve sort
- Materiale plastik
- Produkt boks
- Længde 10 cm
- Bredde 5 cm
- Højde 2.5 cm
Gruppe:
G4117
SUPERTRONIC ABS Miniature Enclosures
Series: PP
Colours: Black, White
SUPERTRONIC ABS Miniature Enclosures
Series: PP
Colours: Black, White
| PP12SW |
|
| Features |
| • Hand-held enclosure consisting of two shell halves • Lap joint construction • Two lateral guides (stud and bushing) are used to connect both shell halves. • Two cams for self-tapping screws where a printed circuit can be mounted. |
|
| PP22SW |
| Transmission Receipt Enclosure for a Remote Control |
|
| Features |
| • Consisting of two shell halves which snap together to connect. • Lap joint construction. • 12V-Battery is required. (GP-23A is suitable and available in our "Components & Devices" catalogue at product group S1138) • The printed circuit is fastened without screws onto a molded stud. • In the upper section, there is a countersunk keypad. • A button actuator is included which lies adjacent to an opening for a LED (You will find suitable LEDs in our Semiconductors catalogue at product group W1222). • The firmly attached plastic button has a stroke of approx. 2mm, e.g. for operating a microswitch which is beneath (not supplied in the delivery). |
|
| Dimensions |
| |
| Outer: | 57x36x16mm |
| Inner, (Usable)1): | 42x32x9mm |
| 1) Including Battery Compartment for Round Cells, Contacts are Attached Loosely | |
| |
| PP23SW |
|
| Features |
| • Similar to PP12SW, but with 4 screws composed of stud and bushing placed in the corner to connect both shell halves |
|
| PP24SW |
| Transmission Receipt Enclosure for a Remote Control |
|
| Features |
| • Similar to PP22SW but with two button actuators lying adjacent to each other (black/red) and an opening above for a LED |
|
| Dimensions |
| |
| Outer: | 57x36x16mm |
| Inner (Usable)1): | 42x32x9mm |
| 1) Including Battery Compartment for Round Cells, Contacts are Attached Loosely | |
| |
| PP40SW |
|
| Features |
| • Black enclosure made of ABS • Lid and base are attached using two studs. • Fastening point for printed circuit |
|
| Dimensions |
| |
| Outer: | 50x36x20mm |
| Inner: | 46x33x16mm |
| |
| PP41SW |
|
| Features |
| • Black enclosure made of ABS consisting of base and lid • Four countersunk screws seal the housing all around. • Four mounting studs for a printed circuit 82x46mm |
|
| Dimensions |
| |
| Outer: | 100x50x25mm |
| Inner: | 96x46x21mm |
| |
| PP42WS |
|
| Features |
| • White sensor enclosure made of ABS • Large louvered plates on either side • Fastening points for printed circuit |
|
| Dimensions |
| |
| Outer: | 71x71x27mm |
| Inner: | 67x67x23mm |
| |
| PP100NBN |
|
| Features |
| • Case for a remote-control transmitter • Comprising three case sections (upper, middle and lower) joined with a screw. • Upper and lower case sections in black, middle case section in blue • Middle case section comes with one pressbutton with approx. 2mm travel, e.g. for actuation of a microswitch underneath (not included in delivery). • For 12V battery • LED aperture |
|
| Note |
| You will find suitable tact switches in this catalogue from product group E3331 on. You will find suitable battery GP-23A in our red "Components & Devices" catalogue in product group S1138. You will find suitable LEDs in our green "Semiconductors" catalogue fron product group W1222. |
|
| Terms of Delivery |
| Minimum order quantity: 1 PKU = 1 piece |
|
| Manufacturer |
| SUPERTRONIC http://www.supertronic.com |
|