Transformer 10VA 230V 9V 1,11A
Varenummer:
86-463
Varekode: MT709-1
Vægt: 280 g
0 stk.
på lager
Ved bestilling nu, får vi dem hjem onsdag d. 4/11
Specifikationer
| Produkt | transformator |
|---|---|
| Sekundær | 9V |
| Primær | 230V |
| AC Effekt, max. | 10 VA |
| Strøm, max. (sekundærvikling) | 1,11A |
Gruppe:
D7547
MYRRA Transformers
Core: EI48
Non Short-Circuit Proof
Output: 10VA
Input Voltage: 230V
MYRRA Transformers
Core: EI48
Non Short-Circuit Proof
Output: 10VA
Input Voltage: 230V
| Technical Specifications |
 | |
| Temperature Resistance Class: | T 50/B |
| Primary Voltage: | 230V (50/60Hz) |
| Rated Power1): | 10VA |
| Test Voltage: | 4kV |
| No-load Voltage: | 1,6 x UN sec |
| Recommended Fuse (Extern.,Primary): | 63mA |
| 1) Per Temperature Class | |
| |
| Note |
| Fitted using two headed screws (2,9x6,5) with a toothed and plain washer, cast in a nipple, recommended hole diameter for pins: 1,3mm, for attachments: 4mm At web you will find: • suitable headed screws in product groups G8191, G8192 • suitable toothed washers (SKM3UZ) and plain washers (SKM4U) in product groups G8185, G8186 • suitable fuses in product group E1441 |
|
| Approvals |
EN61558-1,  0570,  506     |
|
| Terms of Delivery |
| Minimum order quantity: 1 PKU = 1 piece |
|
| Manufacturer |
 |
| http://www.myrra.com |
|
Transformer 10VA 230V 9V 1,11A
86-463
/ MT709-1
0 stk.
på lager
Ved bestilling nu, får vi dem hjem onsdag d. 4/11
Specifikationer
- Produkt transformator
- Sekundær 9V
- Primær 230V
- AC Effekt, max. 10 VA
- Strøm, max. (sekundærvikling) 1,11A
Gruppe:
D7547
MYRRA Transformers
Core: EI48
Non Short-Circuit Proof
Output: 10VA
Input Voltage: 230V
MYRRA Transformers
Core: EI48
Non Short-Circuit Proof
Output: 10VA
Input Voltage: 230V
| Technical Specifications |
| |
| Temperature Resistance Class: | T 50/B |
| Primary Voltage: | 230V (50/60Hz) |
| Rated Power1): | 10VA |
| Test Voltage: | 4kV |
| No-load Voltage: | 1,6 x UN sec |
| Recommended Fuse (Extern.,Primary): | 63mA |
| 1) Per Temperature Class | |
| |
| Note |
| Fitted using two headed screws (2,9x6,5) with a toothed and plain washer, cast in a nipple, recommended hole diameter for pins: 1,3mm, for attachments: 4mm At web you will find: • suitable headed screws in product groups G8191, G8192 • suitable toothed washers (SKM3UZ) and plain washers (SKM4U) in product groups G8185, G8186 • suitable fuses in product group E1441 |
|
| Approvals |
| EN61558-1, 0570, 506 |
|
| Terms of Delivery |
| Minimum order quantity: 1 PKU = 1 piece |
|
| Manufacturer |
| |
| http://www.myrra.com |
|