SPS DIN-Rail 120W 48V/2,5A
Varenummer:
153-305
Varekode: NDR-120-48
Vægt: 580 g
0 stk.
på lager
| Technical
Specifications |
 |
|
| Input Voltage: | 90...264V AC (47...63Hz) |
| 127...370V DC | |
| Input Inrush Current, Typ.: | 35A |
| Leakage Current, Max.: | 1mA |
| Output Voltage Adjustment: | +15% |
| Over Load Protection: | 105...130% |
| Withstand Voltage | |
| I/P-O/P: | 3000V AC |
| I/P-FG: | 2000V AC |
| O/P-FG: | 500V AC |
| Operating Temperature: | -20...+70°C |
| Weight: | 600g |
| I/P = Input, O/P = Output, FG = Frame Ground |
|
|
|
| Part Nr. | UA | IA | PA | DUA | URN | h |
| [V] | [A] | [W] | [%] | [mVp-p] | [%] | |
| NDR-120-12 | 12 | 0...10 | 120 | 2 | 100 | 85,5 |
| NDR-120-24 | 24 | 0...5 | 120 | 1 | 120 | 88 |
| NDR-120-48 | 48 | 0...2,5 | 120 | 1 | 150 | 89 |
| UA= Output Voltage, IA= Output Current Range, PA= Output Power,DUA= Output Voltage Tolerance, URN= Ripple & Noise,h= Efficiency | ||||||
|
||||||
| Note |
| These power supplies are considered as a component that has to be installed in a final equipment. |
|
| Labelling |
   |
|
Inkl. moms
Kr. 375,00
- v/5 – Kr. 325,00
- v/10 – Kr. 275,00
SPS DIN-Rail 120W 48V/2,5A
153-305
/ NDR-120-48
0 stk.
på lager
| Technical
Specifications |
|
|
| Input Voltage: | 90...264V AC (47...63Hz) |
| 127...370V DC | |
| Input Inrush Current, Typ.: | 35A |
| Leakage Current, Max.: | 1mA |
| Output Voltage Adjustment: | +15% |
| Over Load Protection: | 105...130% |
| Withstand Voltage | |
| I/P-O/P: | 3000V AC |
| I/P-FG: | 2000V AC |
| O/P-FG: | 500V AC |
| Operating Temperature: | -20...+70°C |
| Weight: | 600g |
| I/P = Input, O/P = Output, FG = Frame Ground |
|
|
|
| Part Nr. | UA | IA | PA | DUA | URN | h |
| [V] | [A] | [W] | [%] | [mVp-p] | [%] | |
| NDR-120-12 | 12 | 0...10 | 120 | 2 | 100 | 85,5 |
| NDR-120-24 | 24 | 0...5 | 120 | 1 | 120 | 88 |
| NDR-120-48 | 48 | 0...2,5 | 120 | 1 | 150 | 89 |
| UA= Output Voltage, IA= Output Current Range, PA= Output Power,DUA= Output Voltage Tolerance, URN= Ripple & Noise,h= Efficiency | ||||||
|
||||||
| Note |
| These power supplies are considered as a component that has to be installed in a final equipment. |
|
| Labelling |
|
|