BUS Transceiver, RS-485 SO8
Varenummer:
149-171
Varekode: SN65LBC176D
8 stk.
på lager
The SN65LBC176D is a monolithic differential Bus Transceiver designed for bidirectional data communication on multipoint bus-transmission lines. It is designed for balanced transmission lines and meets ANSI standard TIA/EIA-485-A (RS-485) and ISO 8482:1987(E). It combines a 3-state, differential line driver and a differential input line receiver, both of which operate from a single 5V power supply. The driver and receiver have active-high and active-low enables, respectively, which can externally connect together to function as a direction control. The driver differential outputs and the receiver differential inputs connect internally to form a differential input/output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or VCC=0. This port features wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications.
- Very low device supply current can be achieved by disabling the driver and the receiver
- High-speed low-Power LinBiCMOS™ circuitry
- Designed for high-speed operation in both serial and parallel applications
- Low skew
- Designed for multi-point bus transmission on long bus lines in noisy environments
- Wide positive and negative input/output bus voltage ranges
- Thermal-shutdown protection
- Driver positive-and negative-current limiting
- Open-circuit failsafe receiver design
- Glitch-free power-up and power-down protection
- 200µA Maximum very low disabled supply current
- ±200mV Maximum receiver input sensitivity
- 50mV Typical receiver input hysteresis
- Green product and no Sb/Br
Applikationer
Automotive, Industrial, Motor Drive & Control, Building Automation, Metering, Power Management, Security
- :
- Differential Transceiver
- :
- RS485
- :
- 1Drivers
- :
- 1Receivers
- :
- 4.75V
- :
- 5.25V
- :
- SOIC
- :
- 8Pins
- :
- -40°C
- :
- 85°C
Inkl. moms
Kr. 40,00
BUS Transceiver, RS-485 SO8
149-171
/ SN65LBC176D
8 stk.
på lager
The SN65LBC176D is a monolithic differential Bus Transceiver designed for bidirectional data communication on multipoint bus-transmission lines. It is designed for balanced transmission lines and meets ANSI standard TIA/EIA-485-A (RS-485) and ISO 8482:1987(E). It combines a 3-state, differential line driver and a differential input line receiver, both of which operate from a single 5V power supply. The driver and receiver have active-high and active-low enables, respectively, which can externally connect together to function as a direction control. The driver differential outputs and the receiver differential inputs connect internally to form a differential input/output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or VCC=0. This port features wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications.
- Very low device supply current can be achieved by disabling the driver and the receiver
- High-speed low-Power LinBiCMOS™ circuitry
- Designed for high-speed operation in both serial and parallel applications
- Low skew
- Designed for multi-point bus transmission on long bus lines in noisy environments
- Wide positive and negative input/output bus voltage ranges
- Thermal-shutdown protection
- Driver positive-and negative-current limiting
- Open-circuit failsafe receiver design
- Glitch-free power-up and power-down protection
- 200µA Maximum very low disabled supply current
- ±200mV Maximum receiver input sensitivity
- 50mV Typical receiver input hysteresis
- Green product and no Sb/Br
Applikationer
Automotive, Industrial, Motor Drive & Control, Building Automation, Metering, Power Management, Security
- :
- Differential Transceiver
- :
- RS485
- :
- 1Drivers
- :
- 1Receivers
- :
- 4.75V
- :
- 5.25V
- :
- SOIC
- :
- 8Pins
- :
- -40°C
- :
- 85°C