Robot.access: encoder; 2.7÷18VDC; POLOLU 20D
Varenummer:
145-792
Varekode: POLOLU-3499
Vægt: 3 g
2 stk.
på lager
- Add quadrature encoders to your 20D mm metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and
- Hall effect sensors to provide 20 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V
- and provide digital outputs that can be connected directly to a microcontroller or other digital circuit.
- This module is compatible with all of the dual-shaft 20D mm metal gearmotors we carry.
- This kit includes two dual-channel Hall effect sensor boards and two 10-pole magnetic discs
- that can be used to add quadrature encoding to two 20D mm metal gearmotors with extended back shafts
- (motors are not included with this kit). The encoder board senses the rotation of the magnetic disc and provides a resolution of 20 counts per revolution
- of the motor shaft when counting both edges of both channels. To compute the counts per revolution of the gearbox output shaft,
- multiply the gear ratio by 20. (We also have a 6-pole magnetic disc available separately that can work with this encoder to provide 12 counts
- per revolution of the motor shaft.)
Inkl. moms
Kr. 175,00
Robot.access: encoder; 2.7÷18VDC; POLOLU 20D
145-792
/ POLOLU-3499
2 stk.
på lager
- Add quadrature encoders to your 20D mm metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and
- Hall effect sensors to provide 20 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V
- and provide digital outputs that can be connected directly to a microcontroller or other digital circuit.
- This module is compatible with all of the dual-shaft 20D mm metal gearmotors we carry.
- This kit includes two dual-channel Hall effect sensor boards and two 10-pole magnetic discs
- that can be used to add quadrature encoding to two 20D mm metal gearmotors with extended back shafts
- (motors are not included with this kit). The encoder board senses the rotation of the magnetic disc and provides a resolution of 20 counts per revolution
- of the motor shaft when counting both edges of both channels. To compute the counts per revolution of the gearbox output shaft,
- multiply the gear ratio by 20. (We also have a 6-pole magnetic disc available separately that can work with this encoder to provide 12 counts
- per revolution of the motor shaft.)