2Kx14 Flash 6I/O 20MHz DIL8 150mil
Varenummer:
140-094
Varekode: PIC12F683-I/P
Vægt: 1 g
0 stk.
på lager
Gruppe: Y3851
MICROCHIP 8Bit Microcontrollers
Series: PIC12x6_
Case: DIP/DIL, SO
The PIC12F683-I/P is a 8-pin/8-bit flash-based CMOS Microcontroller with nanoWatt technology. The low pin-count (8) PIC® flash microcontroller products offer all of the advantages of the well recognized mid-range x14 architecture with standardized features...
- 256-byte EEPROM data memory
- Extended WDT
- MPLAB® ICD-2 programming support or debugging support with optional header adapter
- Interrupt capability
- 8-level Deep hardware stack
- Direct, indirect and relative addressing modes
- Power-saving sleep mode
- Power-on reset (POR)
- Power-up timer (PWRT) and oscillator start-up timer (OST)
- Brown-out reset (BOR) with software control option
- Multiplexed master clear with pull-up/input pin
- Programmable code protection
- 50nA at 2.0V Typical standby current
- 1µA at 2.0V Typical Watchdog timer current
- Controller Family/Series:
- PIC12F6xx
- CPU Speed:
- 20MHz
- Program Memory Size:
- 3.5KB
- RAM Memory Size:
- 128Byte
- No. of Pins:
- 8Pins
- MCU Case Style:
- DIP
- No. of I/O's:
- 6I/O's
- Embedded Interface Type:
- -
- Supply Voltage Min:
- 2V
- Supply Voltage Max:
- 5.5V
- Packaging:
- Each
Inkl. moms
Kr. 43,06
- v/5 – Kr. 35,47
- v/25 – Kr. 30,38
- v/100 – Kr. 27,78
2Kx14 Flash 6I/O 20MHz DIL8 150mil
140-094
/ PIC12F683-I/P
0 stk.
på lager
Gruppe: Y3851
MICROCHIP 8Bit Microcontrollers
Series: PIC12x6_
Case: DIP/DIL, SO
The PIC12F683-I/P is a 8-pin/8-bit flash-based CMOS Microcontroller with nanoWatt technology. The low pin-count (8) PIC® flash microcontroller products offer all of the advantages of the well recognized mid-range x14 architecture with standardized features...
- 256-byte EEPROM data memory
- Extended WDT
- MPLAB® ICD-2 programming support or debugging support with optional header adapter
- Interrupt capability
- 8-level Deep hardware stack
- Direct, indirect and relative addressing modes
- Power-saving sleep mode
- Power-on reset (POR)
- Power-up timer (PWRT) and oscillator start-up timer (OST)
- Brown-out reset (BOR) with software control option
- Multiplexed master clear with pull-up/input pin
- Programmable code protection
- 50nA at 2.0V Typical standby current
- 1µA at 2.0V Typical Watchdog timer current
- Controller Family/Series:
- PIC12F6xx
- CPU Speed:
- 20MHz
- Program Memory Size:
- 3.5KB
- RAM Memory Size:
- 128Byte
- No. of Pins:
- 8Pins
- MCU Case Style:
- DIP
- No. of I/O's:
- 6I/O's
- Embedded Interface Type:
- -
- Supply Voltage Min:
- 2V
- Supply Voltage Max:
- 5.5V
- Packaging:
- Each