Dispenser til Electrolube TC0R / TCER
Varenummer:
106-329
Varekode: TCRGUNB
Vægt: 127 g
0 stk.
på lager
Gruppe: R3251
ELECTROLUBE HighlyThermally Conductive Rubber
Series: TCR
Thermal Conductivity: 1,7 or 1,8W/mK
| Application |
| • Is a applied between components that may overheat and heat sinks to ensure rapid heat transfer. • Combines the properties of silicone rubber pads with those of a conventional heat transfer paste, and can be used as a low bond strength adhesive, sealant or gasketing compound. |
 |
| TCER75S, TCOR75S |
|
| Features |
| • Single Part, low odour RTV TCOR75S: solvent free • High thermal conductivity • Wide range of operating temperatures -50...+230°C • Remains flexible and elastic at high temperatures • Good chemical resistance • Good electrical insulation characteristics • Moisture cure TCER75S: releasing ethanoll upon cure TCOR75S: releasing oxime upon cure |
|
| Technical Specifications |
|
|||||||||||||||||||||||||||||||||
| Colour: | White | Viskosity | TCER75S: | 80...90Pa s | TCOR75S: | Non Slump Paste | Thermal Conductivity | TCER75S: | 1,8W/mK | TCOR75S: | 1,7W/mK | Tensile Strength: | 2MPa | Elongation at Break: | 300% | Temperature Range (Short Term): | -50...+200°C (250°C) | Storage Temperature: | +10...+25°C | Specific Gravity/Density: | 2,3g/ml | Dielectric Strength: | >8kV/mm | Electrical Insulation: | 1x1014W/cm | Skin Forming Rate: | 10...15min. | Cure Time (20°C): | 24h | ||||
|
|||||||||||||||||||||||||||||||||
| Note |
| • Please note the information concerning limited shipping of dangerous goods. |
|
| TCRGUNB |
| Dispensing Gun for 75ml Sytinge |
|
| Features |
| • This is a very easy and accurate dispensing method for TCER, TCOT and TCR. |
|
| Terms of Delivery |
| Minimum order quantity: 1 PKU = 1 piece Form of delivery: Syringe Articles in bold print in stock, other articles are available on request, delivery time approx. 6 weeks. |
|
| Manufacturer |
 |
| http://www.electrolube.com |
|
Inkl. moms
Kr. 199,00
- v/5 – Kr. 175,00
Produktfiler
Dispenser til Electrolube TC0R / TCER
106-329
/ TCRGUNB
0 stk.
på lager
Gruppe: R3251
ELECTROLUBE HighlyThermally Conductive Rubber
Series: TCR
Thermal Conductivity: 1,7 or 1,8W/mK
| Application |
| • Is a applied between components that may overheat and heat sinks to ensure rapid heat transfer. • Combines the properties of silicone rubber pads with those of a conventional heat transfer paste, and can be used as a low bond strength adhesive, sealant or gasketing compound. |
|
| TCER75S, TCOR75S |
|
| Features |
| • Single Part, low odour RTV TCOR75S: solvent free • High thermal conductivity • Wide range of operating temperatures -50...+230°C • Remains flexible and elastic at high temperatures • Good chemical resistance • Good electrical insulation characteristics • Moisture cure TCER75S: releasing ethanoll upon cure TCOR75S: releasing oxime upon cure |
|
| Technical Specifications |
|
|||||||||||||||||||||||||||||||||
| Colour: | White | Viskosity | TCER75S: | 80...90Pa s | TCOR75S: | Non Slump Paste | Thermal Conductivity | TCER75S: | 1,8W/mK | TCOR75S: | 1,7W/mK | Tensile Strength: | 2MPa | Elongation at Break: | 300% | Temperature Range (Short Term): | -50...+200°C (250°C) | Storage Temperature: | +10...+25°C | Specific Gravity/Density: | 2,3g/ml | Dielectric Strength: | >8kV/mm | Electrical Insulation: | 1x1014W/cm | Skin Forming Rate: | 10...15min. | Cure Time (20°C): | 24h | ||||
|
|||||||||||||||||||||||||||||||||
| Note |
| • Please note the information concerning limited shipping of dangerous goods. |
|
| TCRGUNB |
| Dispensing Gun for 75ml Sytinge |
|
| Features |
| • This is a very easy and accurate dispensing method for TCER, TCOT and TCR. |
|
| Terms of Delivery |
| Minimum order quantity: 1 PKU = 1 piece Form of delivery: Syringe Articles in bold print in stock, other articles are available on request, delivery time approx. 6 weeks. |
|
| Manufacturer |
| |
| http://www.electrolube.com |
|
Produktfiler